42 Pelco Manual C650M (12/98)

10.0 ADDITIONAL FUNCTIONS AND FEATURES

10.1 COUNTER

10.1.1 Counter Memory

Press the COUNTER MEMORY/SKIP/INDEX button repeatedly until the “M” indi-
cator appears on the fluorescent display. Turn the SHUTTLE ring to the right and
the tape will rewind to the 00000 position of the counter and stop. (The rewind to
00000 is slightly inaccurate.)

10.1.2 Tape Counter

A five-digit counter indicates the relative position on the recorded portion of the
tape. EEE EE illuminates to show VCR power is in standby mode.

10.1.3 Counter Reset

Press the COUNTER RESET button to reset the counter to 00000.

10.2 MEMORY BACKUP IN CASE OF POWER FAILURE

The VCR includes a built-in memory backup so the presets for time/date, alarm list,
power loss list, and the number of tape uses will remain in memory if there is a
power failure or if the power cord is disconnected from the AC outlet. Presets re-
main in memory for a maximum of 31 days provided the VCR has been connected
to AC power for at least 40 hours per week. Connection charges the battery backup.
Check the time if there has been a power failure or if the power cord has been
disconnected from AC power for a prolonged period.

10.3 POWER FAILURE TIME DISPLAY

Power failure start times are stored in memory, so you can confirm the start times.
1. Press the DISPLAY button to display the Main menu.
2. Turn the JOG dial to select MAINTENANCE and turn the SHUTTLE ring to the
right. The Maintenance menu will appear.
3. Turn the JOG dial to select POWER LOSS LIST and turn the SHUTTLE ring to
the right. POWER LOSS LIST will appear.
Up to three power failure start times will be displayed. If more than three failures
occurred, the first and last two times will be displayed.
To reset the power loss list, select POWER LOSS LIST CLEAR in the Maintenance
menu and turn the SHUTTLE ring to the right. The POWER LOSS LIST CLEAR
screen will appear. Turn the SHUTTLE ring to the left.
NOTE:
The counter display is
stored in the memory when the
power is turned off, so the same
numbers will be displayed when the
power is restored.
NOTE:
The backup is for memory
only–the VCR will not continue re-
cording during a power outage un-
less connected to a UPS.
<POWER LOSS LIST>
01 02-10-97 02:30