18 Pelco Manual C671M (1/01)
FLUORESCENT DISPLAY
Figure 8. Fluorescent Display
1. M (counter memory stop/month) indicator
•Lights during counter memory stop.
• Also, lights while the VCR is turned off and the month of the VCR’s clock has
been set on the fluorescent display.
2. PL (power loss) indicator
Lights when the VCR is turned on after a power failure during recording.
3. ALARM indicator
Flashes during alarm recording and stays on when the alarm recording is finished.
4. D (time date search/day) indicator
•Lights during the time date search.
•Also, lights while the VCR is turned off and the day of the VCR’s clock has been
set on the fluorescent display.
5. INDEX (index search) indicator
Flashes when recording an index signal, and lights during the index number setup and
the index search. (Index number is shown on the Recording and Playback Mode display.)
6. SKIP (skip search) indicator
Lights during a skip search.
7. Daylight Saving Time indicator
Lights when DAYLIGHT SAVINGS is set to ON.
8. SP, EP (tape speed) indicator
Indicates the tape speed (SP = standard play, EP = extended play).
9. Repeat indicator
Lights when TAPE END in the First Time Set Up menu is set to REPEAT or
ALARM•PROT.
10. Cassette Status indicator
Lights when you insert a tape. The light advances, stops, or flashes according to tape
movement.
11. Timer Recording indicator
Lights when the VCR is in standby for timer recording or during timer recording.
12. Tape Remaining indicator
Indicates the absolute position on the tape (S = start of tape, E = end of tape).
00255
1 2 3 4 5 7 9 10 11 1213 14 15 16 17 1886