36 Pelco Manual C671M (1/01)

REPEAT RECORDING
With this function, when the tape reaches its end during recording, the VCR rewinds the
tape and starts recording again.
Table D shows what happens automatically when the tape ends during recording.
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select CLOCK/FIRST TIME SET UP, and then turn the SHUTTLE
ring right. The First Time Set Up menu appears.
3. Turn the JOG dial to select TAPE END and turn the SHUTTLE ring right.
4. Turn the JOG dial to select REPEAT or ALARM•PROT, and then turn the SHUTTLE
ring right. Refer to Table D. The repeat indicator on the fluorescent display lights.
5. Press the MENU button. The day and time display appears on the screen.

Table D. Action When Tape End Is Reached By Setting

When there are
alarm recordings
on the tape
When there are NO
alarm recordings
on the tape
STOP
The tape stops.
(same as above)
REWIND
The tape automatically
rewinds to the beginning
(except in timer record-
ings) and then stops.
(same as above)
REPEAT
The tape automatically
rewinds to the beginning
and then recording
resumes (recording over
existing alarms).
(same as above)
ALARM•PROT
The tape stops.*
The tape automatically
rewinds to the
beginning and
recording resumes.
*To repeat recording on the same tape in ALARM•PROT mode, eject the tape once and reinsert.
Recommended Number of Tape Uses
Video tape wears during use. Use a new cassette according to Table B.
SERIES RECORDING
You can do series recording by connecting two or more TLR3040 VCRs together. Refer to
Figure 4 for the physical connection.
If a problem occurs (for example, the motor malfunctions during recording) in the first VCR,
the second VCR automatically begins recording.
Series recording will not work during timer or emergency recording.
When recording in series, set CALL OUT in the Rear Terminal menu to a mode other than
WRNG.
There are two types of series recording. Choose either Series Recording 1 or Series
Recording 2.