Pelco VMX300-E MODELS

8C1552M-C (7/07)

MODELS

VMX300 and VMX300-E workstations come with software preloaded on a rack mountable PC; keyboard and mouse are included. Each

workstation supports two monitors. (Note: Monitors are not included. A standard VGA or Super VGA monitor can be used.)

VMX300 provides control and monitoring of CCTV equipment in a client-to-server configuration. A VMX300 workstation can be a client/server

workstation (VMX300-CSVR) or a client workstation (VMX300-CL).

VMX300-CSVR workstations include both client and sever software applications. The model comes standard with licensing for the server and

client and up to 10 cameras. Licenses for up to 100 cameras can be purchased as needed.

VMX300-CL workstations include the client software application and the licensing (five per client) required for the client workstation to connect

to the server. Up to 10 additional client workstations can be connected to the VMX300 server. Note that each client added to the system

decreases the potential number of cameras (by five) that you can add to the system.

NOTE: If your system requires only one client, the client and server applications can both run on the same workstation. To optimize system

performance in a multiple-client system, each client application should run from a dedicated client workstation.

Refer to TableA for a list of VMX300 model numbers.

The VMX300 can support a maximum of 100 licenses. Licenses can be used for cameras (one each), KBD300A keyboards (five each), and clients

(five each; supplied with client workstation).

VMX300-LIC-10 10 additional licenses

VMX300-LIC-20 20 additional licenses

VMX300-LIC-50 50 additional licenses

VMX300-LIC-100 100 additional licenses

Table A. VMX300 Model Numbers

Model Type Video Windows Supported

VMX300-CSVR-0 Client/Server Digital video windows only

VMX300-CL-0 Client

VMX300-CSVR-1 Client/Server One analog video input, one analog video display window,* and multiple

digital video display windows.*

VMX300-CL-1 Client

VMX300-CSVR-4 Client/Server Four analog video inputs, four analog video display windows,* and multiple

digital video display windows.*

VMX300-CL-4 Client

*The VMX300 software allows you to view both analog and digital video display windows simultaneously on the same

system monitor, as follows:

Analog windows: The analog video display window described in the -1 and -4 models typically allows operators to

view video from a camera, matrix switcher, or other analog video source connected directly to the VMX300 rear panel.

The -0 models can receive analog video inputs only through PelcoNet video encoders and Pelco DX8000 and DX9000

Series DVRs, using a network connection.

Digital windows: The number of digital video display windows that can be displayed at one time is limited by the size

and type of images selected for viewing. Refer to Table B in the VMX300 Software Guide for an overview of the CPU

workload and bandwidth amounts used for each type of video stream (the video in a custom window).

Table B. VMX300 Sample Licensing Configurations

System Configuration Licenses Used Licenses Available for Cameras, KBD300A Keyboards,

or Additional Client Workstations

Client/Server Workstation Base license 100

1 additional client workstation 5 95

2 additional client workstations 10 85

10 additional client workstations 50 50 (cameras only)