Specifications, Electrical

SPECIFICATIONS

Input Voltage:	Selectable 100, 120, 230 VAC, 50/60 Hz via the Primary Line Input connector
	strip
Output
Voltage/Power:	Selectable 24 VAC (Tap A), 26 VAC (Tap B), or 28 VAC (Tap C) at 100 VA via
	the Secondary Output Tap’s connector strip
Fusing:	One fuse. Select from one of the following supplied fuses:
	Three 1.6 A fast-acting fuses (100 VAC or 120 VAC)
	Three 500 mA fast-acting fuses (230 VAC)
Spare Fuse
Holder:	Two spare fuse holders (attached to transformer cover)
MECHANICAL
Construction:	Aluminum
Finish:	Gray polyester powder coat
Cable Entry:	Two hole plugs will accommodate 3/4-inch (1.91 cm) conduit fittings (not
	provided) that meet NEMA Type 4X standards.
Mount Method:	Four 0.375-inch (0.95 cm) holes on mounting plate
Latch:	One stainless steel link-lock latch secured with screw; latch also can be
	secured with padlock (not supplied)
GENERAL
Environment:	Indoor/outdoor
Operating Range:	-50°F to 122°F (-45.56°C to 50°C)
Weight:	6.5 lb (2.95 kg)
Dimensions:	See Figure 5

(Design and product specifications subject to change without notice.)

C561M-D (11/03)