Pelco Manual C585M-B (11/98) 19
Fiber Optic Cabling
Fiber optic transmission of both video and control presents some distinct
advantages. Higher quality and longer distance transmission characteristics,
inherent noise resistance, greater flexibility for usage, and reduced cabling
diameter are but a few of these advantages. The incorporation of fiber optics sys-
tems are encouraged, especially when covering long distances and when seeking
to maintain the highest quality video signals. Consult with equipment manu
facturers and fiber optic cabling manufacturers or suppliers for recommendations
regarding fiber optic type, operating specifications, and installation requirements.
Proceed to Section 3.4, POWER.
3.4 POWER
1. Run wiring and connect receiver input power to AC HIGH, AC LOW, and ground.
If using 24 VAC to power the receiver, refer to Table C for the maximum
recommended wiring distances.
2. Power up the controller and receiver.