PeliLiteTM 1800

OPERATING INSTRUCTIONS CAT. #1800

BATTERY INSTALLATION

1.Remove lens housing by turning counter-clockwise.

2.Remove the lamp module.

3.Remove used batteries and replace with fresh batteries as shown on the outside of the engraved body.

4.Replace the lamp module.

5.Replace lens housing squarely on threads and turn clockwise while pressing on the lens housing slightly.

ON/OFF

Turn the lens housing clockwise until light activates.

To turn light off, back lens housing off counter-clockwise until light goes off. Continue to back off for approximately one full turn to eliminate possibility of light activating accidentally in storage. DO NOT OVERTIGHTEN.

LAMP REPLACEMENT

To remove lamp module follow steps #1 and #2.

To replace lamp module follow steps #4 and #5.

CAUTION:

If light is not to be used for some time, remove batteries to prevent possible leakage and corrosion.

PRODUCT SPECIFICATIONS

Lamp Life:

20 hours

Battery Type:

E93 1.5V Alkaline C-cell (2)

Battery Brand:

Eveready® Energizer® Duracell®

WARNING – Explosion Hazard - Batteries must only be changed in non-hazardous locations

WARNING – Explosion Hazard - Substitution of components may impair suitability for use in hazardous locations.

CAUTION:

If light is not to be used for some time, remove batteries to pre- vent possible leakage and corrosion.

Pelican Products, Inc. guarantees its products for a lifetime against break- age or defects in workmanship. This guarantee does not cover the lamp or batteries (rechargeable or alkaline). All warranty claims of any nature are barred if the flashlight has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident.

Refer to www.pelican.com/warranty for full details.

Pelican Products, Inc., garantiza sus productos de por vida contra roturas o defectos de fabricación. Esta garantía no cubre la lámpara ni las pilas (recargables o alcalinas). Las reclamaciones de garantía de cualquier clase se considerarán nulas en caso de que la linterna haya sufrido alteraciones, daños o modificaciones físicas de cualquier tipo, o bien se haya hecho un mal uso, un uso abusivo, o haya sufrido negligencias o accidentes. Encon- trará más información en www.pelican.com/warranty.

Les produits de Pelican Products, Inc., sont garantis à vie contre la casse et les défauts de fabrication. Cette garantie ne couvre pas les ampoules

ni les batteries (alcalines ou rechargeables). Toute demande de prise en charge sous garantie, de quelque nature que ce soit, sera refusée si la torche a été modifiée, endommagée ou physiquement changée d’une façon ou d’une autre ou encore sujette à un traitement abusif, une mauvaise utilisation, une négligence ou un accident. Pour obtenir des informations complètes, visitez le site www.pelican.com/warranty

23215 Early Ave. • Torrance, CA 90505 USA

Tel (310) 326-4700 • FAX (310) 326-3311 • www.pelican.com

PELICANTM CANADA

10221-184 St. • Edmonton, Alberta T5S 2J4 • Tel (780) 481-6076 • FAX (780) 481-9586

PELITM PRODUCTS, S.L.U.

c/ Provença, 388, Planta 7 • 08025 • Barcelona, Spain

Tel: +34 934 674 999 • Fax: +34 934 877 393

All trademarks are registered and/or unregistered trademarks of

Pelican Products, Inc., its subsidiaries and/or affiliates.

Energizer and Eveready are registered trademarks of Eveready Battery Company, Inc.

Duracell is a registered trademark of Gillette Company.

1803-311-000 5-2862 Rev B

© 2012 Pelican Products FE/12

REPLACEMENT PARTS

CAT#

DESCRIPTION

1801

O-RING

1804

LAMP MODULE

HYDROGEN GAS ABSORBER

Internal catalyst pellets, located on the lamp, are there to help absorb hydrogen gas that could possibly be emitted by defective, leaking, reversed polarity or heavily discharged batteries. If the pel- lets become lost or damaged, replace lamp immediately. If pellets become wet, let them air dry. Pelican Products assumes no liability for any brand of batteries which are defective or cause injury to anyone when used in any Pelican flashlight.

Battery Safety Information

WARNING: HANDLE AND STORE BATTERIES PROPERLY TO AVOID INJURY OR DAMAGE BATTERIES CAN BE DANGEROUS!

Most battery issues arise from improper handling of batteries, and particularly from the use of damaged or counterfeit batteries. Please review the information below to avoid serious injury and/or damage to your property.

Alkaline Batteries

1.For those lights with hazardous location safety approvals for explosive environments please be advised that the safety approval is only valid for the specified battery type manufacturer and, where applicable, brand names that are displayed on the flashlight and/ or instructions sheets that are supplied with the light. The use of other battery technologies may reduce the performance of the flashlight and will invalidate the safety approval.

2.Always read the battery manufacturers recommendations for the appropriate use of the battery technology/brand prior to using the flashlight.

3.When replacing the batteries:

a.Replace all the batteries at the same time.

b.Do not mix battery brands and old and new batteries.

c.Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and equipment.

4.Do not change batteries in a hazardous location.

5.Remove batteries from equipment if it is not to be

used for an extended period of time.

12/11

PELICANTM

PeliLiteTM 1800

OPERATING INSTRUCTIONS

Submersible

CAT. #1800

23215 Early Ave. • Torrance, CA 90505

(310)326-4700 • FAX (310) 326-3311 www.pelican.com

Page 1
Image 1
Pelican 1800 specifications Battery Installation, On/Off, Lamp Replacement, Product Specifications, Replacement Parts

1800 specifications

The Pelican 1800 is a versatile and robust case designed to provide superior protection for sensitive equipment and gear. Renowned for its durability, the Pelican 1800 is a preferred choice among professionals in various fields, including photography, military, and outdoor adventures.

One of the standout features of the Pelican 1800 is its impact-resistant exterior, constructed from high-quality polypropylene copolymer. This material is designed to withstand extreme conditions, ensuring that whatever is inside is safeguarded against shocks, drops, and other physical hazards. The case is also equipped with a watertight O-ring seal, making it resistant to dust and moisture, further enhancing its protective capabilities.

The Pelican 1800 boasts a spacious interior that can be customized to fit various gear types. The interior foam can be easily manipulated or replaced, allowing users to create custom compartments tailored to specific equipment, such as cameras, drones, medical devices, or sensitive electronics. This feature is particularly advantageous for professionals who require precise organization and protection of their tools.

Another notable technology integrated into the Pelican 1800 is the inclusion of a pressure relief valve. This valve allows for the automatic equalization of pressure inside the case during changes in altitude, preventing vacuum lock and making it easier to open the case after transportation. This thoughtful design consideration is especially beneficial for travelers and field professionals who frequently move between altitudes.

The case is also equipped with stainless steel hardware, including padlockable hasps, ensuring added security for valuable contents. Users can rely on the Pelican 1800 for secure storage and transportation of essential equipment, knowing that it can withstand unauthorized access attempts.

Furthermore, the Pelican 1800 is designed for easy transport. It features comfortable handles and a rugged wheeled bottom, making it maneuverable across various terrains. The multi-purpose nature of this case makes it suitable for a multitude of applications, from outdoor expeditions to industrial environments.

In summary, the Pelican 1800 combines rugged design, customizable storage options, and advanced protective technologies, making it an ideal choice for anyone in need of reliable, portable equipment protection. Whether for personal use or professional applications, the Pelican 1800 stands out as a leader in the protective case industry.