Pella 802Q0101 installation instructions Remember To Use Appropriate, Installation Instructions

Models: 802Q0101

1 7
Download 7 pages 32.16 Kb
Page 1
Image 1
© 2009 Pella Corporation

© 2009 Pella Corporation

Part Number: 802Q0101

INSTALLATION INSTRUCTIONS

Part Number: 802Q0101 SLIDING, SINGLE-HUNG and FIXED WINDOW WITH FINS

Installation Instructions for Typical Wood Frame Construction.

These instructions were developed and tested for use with typical wood frame wall construction in a wall system designed to manage water. These instructions are not to be used with any other construction method. Installation instructions for use with other construction methods or multiple units may be obtained from Pella Corporation or a local Pella retailer. Building designs, construction methods, building materials, and site conditions unique to your project may require an installation method different from these instructions and additional care. Determining the appropriate installation method is the responsibility of you, your architect, or construction professional.

YOU WILL NEED TO SUPPLY:

TOOLS REQUIRED:

Cedar or Impervious shims/spacers (12 to 20)

Tape measure

2" galvanized roofing nails (1/4 lb.)

Level

Closed cell foam backer rod/sealant backer (12 to 30 ft.)

Square

• Pella® SmartFlashfoil backed butyl window

• Hammer

 

and door flashing tape or equivalent

Stapler

 

 

 

OSI Quad or Geocel Pro-Flex Tri-polymer Sealant

Sealant gun

 

(1 tube per window)

 

 

SEALANT

Scissors or utility knife

Great Stuff Window and Door Insulating Foam Sealant

Small flat blade screwdriver

 

by the Dow Chemical Company or equivalent low pressure

 

 

 

 

polyurethane window and door foam - DO NOT use high

• Rubber mallet

 

pressure or latex foams

 

 

 

 

Installation will require two or more persons for safety reasons.

REMEMBER TO USE APPROPRIATE

PERSONAL PROTECTIVE EQUIPMENT.

INSTALLATION INSTRUCTIONSCorner

Flashing

Tape

Side  SLIDING, SINGLE-HUNG and FIXED WINDOW WITH FINS

Flashing

Tape

Top

Nailing Fin

 

Flashing

 

Tape

 

Corner

 

Flashing

 

Tape

Weep Valves

 

Side

Sill Flashing Tape #1

Flashing

Sill Flashing Tape #2

Tape

Weather Resistive Barrier

 

 

Sheathing

 

Framing

Installation will require two or more persons for safety reasons. Always read the Pella Impervia Limited Warranty before purchasing or installing Pella Impervia products. By installing this product, you are acknowledging that this Limited Warranty is part of the terms of the sale. Failure to comply with all Pella Impervia installation and maintenance instructions may void your Pella Impervia product warranty. See Limited Warranty for complete details on http://warranty.pellaimpervia.com.

Page 1
Image 1
Pella 802Q0101 installation instructions Remember To Use Appropriate, Personal Protective Equipment, Pella Corporation