INSTALLING ROTO COVER AND CRANK

Note: Finish the interior of the window and allow the window to dry before proceeding with these instructions. (To open the window for finishing, partially insert the lock handle into the jamb, unlock the unit, temporarily attach the crank handle and turn to open.)

A. Place the cover over the operator stud and snap into place. Position the pocket end of the cover into place.

Note: If the cover does not have the screw hole, apply pressure on the pocket end of the cover to snap the cover into place and proceed to step C.

B. Insert the provided screw into the hole in the bottom of the pocket. 8VHD3KLOOLSVVFUHZGULYHUWRVHFXUH the pocket screw snug against the bottom of the pocket to avoid scratching the crank handle knob. DO NOT over tighten.

C. Use a medium size flat-blade screwdriver to loosen the set screw in the crank handle.

D. Slide the crank handle onto the stud. Unlock, open window, then close and lock window.

E.Fold the crank handle down and check alignment of knob with the pocket.

Note: You may need to adjust the crank position on the stud until the correct alignment is achieved.

Pocket End

Screw Hole

Operator Stud

A

Crank Handle

D

 

Operator Stud

 

 

Set Screw

C

 

 

B

 

Knob

E

Pocket

F.Open the crank and tighten the set screw.

*After the final installation, fold the crank over and snap the knob into the pocket.

Note: Even with the window open the crank can be folded to avoid interferring with the window treatments.

CASEMENT WINDOW LOCK LEVER REMOVAL AND INSERTION

Note: You may want to remove the lock lever prior to finishing the window, or if it needs to be replaced with a lock lever in a different finish.

A. Unlock and open the window.

B. Place the lock lever in the locked position.

C. From the exterior of the window, insert a small flat-blade screwdriver between the cam and lock lever near the bottom of the opening between the stop and frame gasket.

D. Push the screwdriver inwards with a small amount of pressure; then turn the blade slightly clockwise for a left hand unit, counter-clockwise for a right hand unit. DO NOT over-twist the screwdriver, this can damage the lock driver.

Note: This will release the hook in the lever from the cam hook.

E.Remove the lock lever by pulling it toward the interior of the building.

F.To install a lock lever, hold it in the lock position and insert it, from the interior, into the slot until it snaps into the cam.

BInterior

Exterior

E

D

Exterior

C

F

Interior

© 2012 Pella Corporation

Part Number: 807X0101

Page 6
Page 7
Image 7
Pella 807X0101 warranty Installing Roto Cover and Crank, Casement Window Lock Lever Removal and Insertion
Page 6

807X0101 specifications

The Pella 807X0101 is a premium window model designed for homeowners seeking a blend of aesthetic appeal, energy efficiency, and superior functionality. Recognized within the industry for its cutting-edge technology and innovative design, this window embodies Pella's commitment to quality and performance.

One of the standout features of the Pella 807X0101 is its advanced energy-efficient glass technology. The window comes with double-pane glass, designed to minimize heat transfer while maximizing natural light. This feature is crucial for maintaining comfortable indoor temperatures year-round, ultimately reducing heating and cooling costs. Additionally, it is equipped with Low-E (low emissivity) glass coatings that reflect heat in summer and retain warmth in winter, ensuring a consistent indoor climate.

The frame of the Pella 807X0101 is constructed from high-quality materials that are built to withstand the elements. Pella utilizes a fiberglass material that offers exceptional durability and resistance to warping, rotting, and fading. This makes the window not only sturdy but also low-maintenance, requiring minimal care over its lifespan.

Furthermore, the Pella 807X0101 features a sleek, modern design that seamlessly integrates with a variety of architectural styles. Homeowners can choose from multiple color options and finishes, allowing for personalization that complements their home's aesthetic. The window's clean lines and elegant proportions enhance curb appeal while providing a panoramic view of the outside.

In terms of security, the Pella 807X0101 is equipped with advanced locking mechanisms that enhance safety without compromising ease of use. The multi-point locking system secures the window at multiple points, making it a reliable choice for homeowners concerned about safety.

Noise reduction is another significant advantage of the Pella 807X0101. The insulation properties of the glass and frame design help create a quieter indoor environment, making it an ideal choice for homes located in busy or noisy areas.

Overall, the Pella 807X0101 is an excellent investment for homeowners looking to upgrade their windows. With its combination of energy efficiency, durability, aesthetic versatility, and security features, it stands out as a top choice for those aiming to enhance their living spaces while benefiting from long-term savings and comfort.
Top Page Image Contents