Pella 808F0105 warranty Sealing and Fastening the Window, Head blind, Stop, Blind, Stool

3 SEALING AND FASTENING THE WINDOW

A.Apply a 3/8" continuous bead of sealant to the interior face of the existing blind stops at the head and both jambs.

B.Place a bead of sealant where the existing stool meets the existing frame sill and jambs.

Head blind

stop

Jamb

blind

stop

3A

Stool

Sill

3B

C.Place a bead of sealant where the jamb and sill meet.

D.Insert the window into the opening. Set the bottom of the window in first and tilt the top into place. Make sure the window is centered in the opening and is pressed firmly against the exterior blind stops.

3C

E.Place a shim at each of the top corners in line with the pre- punched holes, and partially insert 2-1/2" screws (provided).

This will hold the window in place while shimming it plumb and square. Trim shims back so they recessed back 1/4” - 1/2” from the interior face of the window frame.

3E