Pella 808F0105 warranty You Will Need To Supply, Tools Required

© 2011 Pella Corporation Part Number: 808F0105

INSTALLATION INSTRUCTION -

INSTRUCCIONES DE INSTALACION

PELLA® PRECISION FIT AND RENOVATION POCKET

REPLACEMENT DOUBLE-HUNG VENT WINDOW

Important! The Pella Replacement Window is designed to replace older style double-hung windows. The original window frame will remain in place and only the existing sash will be removed. Read these instructions thoroughly before beginning. Failure to install as recommended will void any warranty, express or implied. For types of installation other than shown, contact your local Pella representative or visit http://www.pella.com.

YOU WILL NEED TO SUPPLY:

•Cedar or Impervious shims/spacers (12 to 20)

•Closed cell foam backer rod/sealant backer (12 to 30 ft.)

•Pella® SmartFlash™ foil backed butyl window

and door flashing tape or equivalent

• High quality exterior grade polyurethane or silicone

sealant (1 tube per window) SEALANT

•Great Stuff ™ Window and Door Insulating Foam Sealant by the Dow Chemical Company or equivalent low pressure polyurethane window and door foam -

DO NOT use high pressure or latex foams.

Installation will require two or more persons for safety reasons.

TOOLS REQUIRED:

• Tape measure

• Level

• Hammer

• Utility knife

• Pry bar

• Sealant gun

• Screwdrivers

(#2 Phillips and Flat blade)

• Putty knife

• Wood chisel

• Drill

REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.

Checkrail

Flashing tape

Always read the Pella® Limited Warranty before purchasing or installing Pella products. By installing this product, you are acknowledging that this Limited Warranty

is part of the terms of the sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella product warranty. See Limited Warranty for complete details at http://warranty.pella.com.