Pella V983492 installation instructions You Will Need To Supply, Tools Required

REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.

	Nailing Fin	Head
Corner	Top		Water
Flashing
	Flashing		Resistive
Tape
	Tape		Barrier
Side	Corner
	Flashing		Sheathing
Flashing	Tape
Tape			Framing
Wood Blocking		Sill	Sill Flashing Tape #1
	Side Flashing Tape
			Sill Flashing Tape #2

Head

Concrete

block

Wood Blocking	Sill	Sill Flashing Tape #1
		Sill Flashing Tape #2

Always read the Vinyl Window and Door Limited Warranty before purchasing or installing Vinyl Windows and Doors manufactured by Pella Corporation. By

installing this product, you are acknowledging that this Limited Warranty is part of the terms of the sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella product warranty. See Limited Warranty for complete details at http://warranty.pella.com.

YOU WILL NEED TO SUPPLY:

•Cedar/impervious shims/spacers (24 to 40)

•2" galvanized roofing nails (Nail-fin only) (1/4 lb.)

•1/4" x 2" masonry screws for concrete application

•Closed cell foam backer rod/sealant backer (20 to 30 ft.)

• Pella® SmartFlash™ foil backed butyl window and door flashing tape or equivalent

•High quality exterior grade polyurethane or

silicone sealant (2 to 3 tubes per door) SEALANT

•Great Stuff™ Window and Door Insulating Foam Sealant by the

•Dow Chemical Company or equivalent low pressure polyurethane window and door foam - DO NOT use high pressure or latex foams.

•Pella aluminum sill support or 2 x 4 wood blocking

•Pella sill pan or equivalent

•Interior trim and/or jamb extensions (20 to 30 ft.)

Installation will require two or more persons for safety reasons.

Page-2

TOOLS REQUIRED:

•Tape measure

•Level

•Square

•Hammer

•Stapler

•Sealant gun

•Scissors or utility knife

•Screwdrivers (#2 Phillips)

•3"-5" Wide putty knife

•Drill

•#2 Phillips bit

•Square (Robertson) drill bit