EQUITY 386SX

lnstallation at 16MHz. If this doea not work properly, STY switching to 8MHz for the lnstallation. tf you am still unable to load the program at 16MHz, try loading at 8MHz and then switching to 16MHz.

Whenu8lngaaofhvampaokagethatuaesa keydisk aa it oopypcotbctkn method, try loading lt at 16MHz. fl this does not work, enable the Auto Speed option in SETUP.

Power-on Password

Make sure that you do not forget the Power-on Password should you set one up. If you do, it will be wcwsary to disable it by moving jumper 2 on the main oircuit board to the l-2position.

If you enable network server mode after installing a password, the oornputer prompts you for that password before allowing you to aorxtssthesystem-aslongasyoubootthe system from the Reference diskette.

However, if you install MS-DOS on the hard disk and boot from that drhfe, the prompt no longer appears. The computer shows the normal MSDOS prompt (e.g., C>), but it still requires the password before allowing you to access the sy3tam In network 8erver mode.

EQ386SX-6

9/22/89

Equity Series Computers