7
Placing the Cleaner into the Pool
WARNING
The power supply MUST be placed and a minimum distance of 10 feet away from the pool. Failure to do so could create an electrical hazard which could result in death or serious injury to pool or spa users, installers, or others due to electrical shock, and may also cause damage to property.
1.Place the cleaner in the pool upside down, gently tilting it side to side to allow any trapped air to escape. Oncetheairisremoved,turnthecleanerrightsideupandallowittosinktothebottomofthepoolwiththe wheels down. See Figure 5.
NOTE: Your cleaner must be completely submersed in the pool water before it is switched on. If the cleaner does not sink it is because air is still trapped inside. Repeat Step 1.
2.Uncoil the Floating Cable that extends from the cleaner’s body and spread it over the pool water surface asevenlyaspossible.Ifyourpooliselongated(rectangular,oval,etc.),placetheFloatingCableatthemiddle ofthepool'slengthtoallowadequatecablelengthtoreachtheentirepool.MakesurethattheFloatingCable is not tangled or kinked. See Figure 6.
3.Plug your cleaner's Floating Cable into the Power Supply, see Figure 7. Be sure that the Power Supply ON/OFF Switch is in the “OFF” position.
Figure 5.
Figure 6.
(Remember to keep the Power Supply at least 10 feet away from the pool.)
Prowler™ 710 Installation and User’s Guide
