Pentair quick start Setting up the PDA for the first time

4 1

Notes PDA First Time Setup Instructions

Thank you for purchasing the IntelliTouch ScreenLogic PDA interface. Before you can use your PDA to operate your ScreenLogic system, you need to setup the ScreenLogic PDA program. The PDA must be in its cradle with power connected.

Charging the PDA

You need to charge the main battery and internal backup battery from empty to full. This takes about 8 hours the first time and 4 hours thereafter, whether the device is on or off.

IMPORTANT: When you are not using your ScreenLogic PDA, please return it to the cradle to replenish the battery. The PDA can still be operated wirelessly in the cradle. The battery is good for about a week without operation, and 2 to 3 hours of continuous use.

Setting up the PDA for the first time

Before setting up the ScreenLogic PDA program, connect the AC adapter to the cradle and to an electrical outlet, and insert the PDA into the cradle.

Note: The following setup procedure assumes that you have already connected the ScreenLogic wireless router and Protocol adapter to a working IntelliTouch system.

To setup the ScreenLogic PDA program:

1.Press the power button on the front of the PDA. The Dell opening screen is displayed.

2.Using the stylus, tap on the screen to setup your pocket PC.

3.Tap in the center of the 5 cross-hairs as they move across the screen to align the touch screen.

4.Tap Next on the following screen.

ScreenLogic PDA Quick Start Guide ScreenLogic PDA Quick Start Guide