Keep piping tight and free of leaks: pump suction line leaks may cause trapped air in filter tank or loss of prime at pump; pump discharge line leaks may show up as dampness or jets of water.

Either plug drain fitting with a 2" NPT pipe plug or run piping from drain fitting to an acceptable waste water disposal point. Provide plug or valve for wastewater line.

Valves

Provide isolation valves to allow for easy servicing of filter. A check valve installed between pool and filter inlet will prevent contaminants from draining back into pool.

A check valve installed between filter and heater will prevent hot water from heater from backing up into the

SPECIFICATIONS

TABLE I - SPACE REQUIREMENTS in inches (mm)

filter and deforming filter elements.

NOTICE: Damaging filter elements through excessive heat voids the warranty.

Do not use selector valves (i.e., slide or multiport etc.) with this filter. Filter cannot be backwashed. See Page 6 for cleaning information.

Electrical

BE SURE filter grounding and bonding meets local and National Electrical Code standards. All wiring, ground- ing and bonding of associated equipment must meet local and National Electrical Code standards.

Model No.

A

B

 

C*

D

E

 

 

 

 

 

 

S8M600

32-1/2 (826)

42-1/4 (1073)

8

40 (1020)

68 (1730)

 

 

 

 

 

 

 

* Number of clamps.

 

 

 

 

 

 

TABLE II - FILTER SPECIFICATIONS AND OPERATING INFORMATION

 

 

 

 

 

 

 

 

 

Filter Model:

 

S8M600

 

 

 

 

 

 

 

 

 

Filter Area

 

600

Sq. Ft. (55.8 Sq. M)

 

 

 

 

 

 

 

 

 

Maximum Flow Rate

 

160

GPM (606 l/min.)

 

 

 

 

 

 

 

 

 

Max Operating Pressure

 

50 PSI (345 kPa)

 

 

 

 

 

 

 

 

 

 

D

C

A

E

B

INLET

7.812" (19.85 cm)

F

OUTLET

9.19" (23.3 cm)

2" (51mm) Sta-Rite Union Connectors

Figure 1 - Dimensions in inches (mm)

4

Page 3 Page 5
Page 4
Image 4
Pentair S8M600 owner manual Specifications, Valves, Electrical
Page 3 Page 5

S8M600 specifications

The Pentair S8M600 is a high-performance water treatment system designed to provide exceptional filtration and purification capabilities, making it an ideal choice for diverse applications, including residential, commercial, and industrial use. This unit has garnered attention due to its advanced features, robust design, and cutting-edge technologies that ensure efficient water management and sustainability.

One of the standout features of the S8M600 is its innovative multi-stage filtration process. This system employs multiple filtration layers, including pre-filters, activated carbon, and sediment filters, ensuring that contaminants such as chlorine, sediment, and other impurities are effectively removed. This thorough filtration process results in purified water free from odors and unpleasant tastes, enhancing the overall quality of water for various uses.

Another significant characteristic of the Pentair S8M600 is its user-friendly interface. The system is equipped with a digital display and intuitive controls, allowing users to monitor water quality and filtration performance easily. This feature not only improves user experience but also facilitates timely maintenance and troubleshooting, ensuring the system operates at peak efficiency.

Energy efficiency is another noteworthy aspect of the S8M600 design. The unit incorporates energy-saving technologies that minimize power consumption while maximizing filtration efficiency. This focus on sustainability makes the S8M600 an environmentally friendly choice, appealing to users who value both performance and ecological responsibility.

Moreover, the S8M600 is built with durable materials that ensure longevity and reliability. Its robust housing protects the internal components from damage while seamlessly blending into various settings. The system is also designed for easy maintenance, with replaceable filter cartridges that simplify the process of keeping the unit in optimal condition.

In summary, the Pentair S8M600 is a comprehensive water treatment solution that combines advanced filtration technology, user-friendly features, energy efficiency, and robust construction. Its ability to deliver high-quality purified water makes it a sought-after choice for anyone looking to improve water quality in their home or business. Whether for drinking, cooking, or industrial applications, the S8M600 stands out as a reliable and effective water treatment system.
Top Page Image Contents