1 Getting

7 Use the four-way controller (23) to change the day and press the four-way controller (5) again.

2and 3will be displayed above and below the year.

Date Adjust

Date Style mm/dd/yy 12h

03 / 01 / 2004

12 : 00 AM

MENU Exit

OK OK

Started

8 Repeat step 7 to change the [year], [hour], and [minutes].

9 Press the OK button.

The camera is ready to take a picture. When you set the date and time using the MENU button, you will return to the Menu screen. Press the OK button again.

•When you finish the settings and press the OK button to set the date and time, the camera clock is reset to 00 seconds.

•When the initial settings screen is displayed, you can cancel the settings operation and switch to Capture mode by pressing the MENU button. If this is done, the initial settings screen will be displayed next time you turn the camera on.

•You can change the settings after they have been made. Refer to “Changing the Date Style and Date / Time” (p.95).

Setting the Recorded Pixels and the Quality Levels

You can set the size and quality of the recorded pixels to correspond with the application of the image.

A much clearer image can be obtained and printed when both the recorded sizes and the pixel quality star levels are greater.

Use the [ARec. Mode] menu for setting.

See “Basic Operation of the FULL Menu” (p.31) , “Selecting the Recorded Pixels” (p.41) and “Selecting the Quality Levels” (p.42) for the setting procedure.

20