Disconnecting the Camera from your PC
Windows 2000 / Me
1 Double-click the [Unplug or eject hardware] icon in the task bar recognized area.
The [Remove Hardware] screen will appear.
2 Confirm that [PENTAX USB DISK Device] is selected and click [Stop].
The [Stop Hardware Device] screen will appear.
3 Confirm that [PENTAX USB DISK Device] is selected and click [OK].
A message will appear.
4 Click [OK].
5 Turn off the camera and
disconnect the USB cable from your camera and PC.
The computer is downloading the camera’s image data with the camera is connected to the computer and the camera viewfinder lamp (red) is
blinking. Image data may be damaged if you disconnect the camera during such conditions.
In the event that an error message is displayed in Step 4, confirm that the viewfinder lamp is not blinking and then disconnect the camera.
18