Installing the Software

This section describes the procedures for installing the necessary software.

Installing the USB driver p.6

Installing the image processing software (ACDSee for PENTAX) p.10

Installing the USB driver on Windows 98/98 SE only

If you are using Windows 2000, Windows Me or Windows XP, you do not need to install the USB driver. When you connect the camera to your computer with the USB cable, your computer will automatically detect the camera as [Removable Disk].

1

2

Turn your computer on.

Insert the CD-ROM (S-SW18) into the CD-ROM drive.

The PENTAX Software Installer screen appears automatically, but no action is required at this stage.

3 Make sure the camera is turned off and connect it to your computer with the USB cable.

4 Turn your camera on.

Your computer will automatically detect the camera as new hardware and the Wizard screen will appear.

6