ADVANCED OPERATION
3
● When the bars are displayed above the l side on the bar graph, it indicates overexposure and when the bars are displayed above the m side, it indicates underexposure. When a single bar is displayed in the center of the bar graph, it indicates correct exposure.
Moving one bar above the bar graph indicates 0.3 step (0.3EV). However, when over or under exposure is set beyond +3 or
● The bar graph in the view finder is displayed only when the AE Pentaprism Finder 672 is attached.
When the shutter release button is depressed halfway, the shutter speed and bar graph (the illustration indicates
Exposure Warning
If the subject is too bright or too dark, the selected shutter speed will blink in the viewfinder as shown. It means that the exposure is out of metering range, unable to obtain a correct exposure even if the shutter speed or aperture is adjusted. Use a ND filter or select a darker subject if the subject is too bright or use a flash if it is too dark.
51