Pentax 67II Troubleshooting

OTHERS

Troubleshooting

What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items.

Symptoms	Causes	Remedies	Reference
The shutter cannot be	The last frame is exposed.	Remove the film.	Page 31
released.
	The main switch is set to d.	Set the main switch to i.	Page 16
	The low battery warning H	Replace the batteries.	Page 14
	appears.
	The Self-Timer Mode is set.	Cancel the Self-Timer Mode.	Page 43
	The film is not winded.	Wind the film.	Page 41
Indicators do not appear on	The main switch is set to d.	Set the main switch to i.	Page 16
the LCD panel.
	No batteries have been installed.	Install the batteries.	Page 14
	The batteries are improperly	Install the batteries properly.	Page 14
	installed.
	The batteries are dead.	Replace the batteries.	Page 14
Focus is not precise in the	The pressure plate has not been set	Set the pressure plate according to	Page 25
picture.	to the proper position.	the film type.
Film winding is very heavy.	The pressure plate has not been set	Set the pressure plate according to	Page 25
	to the proper position.	the film type.
The first frame (or the last	The film start mark had not been	Set the film start mark to the proper	Page 25
frame) was cut off on the film.	properly set.	position.

76