4 TakingPictures

1

3

2

Remote control unit E

E abcR dDC

Using the Remote Control Unit (optional)

You can switch the Drive mode to Remote Control mode and take pictures using the remote control unit for Pentax cameras (optional). The remote control receiver is on the front of the camera. Operate the remote control unit toward the camera lens.

1 Press the ( button in Capture

38

mode to display < on the LCD

 

monitor.

 

Depending on the previous setting, <or >

 

appears.

 

The self-timer lamp blinks slowly and the

09/25/2004

 

camera is ready to take the picture.

14:25

 

2 Press the zoom button to adjust the zoom (for remote control unit E).

The zoom position changes each time the zoom button is pressed in the following sequence: tele ´ middle ´ wide

3 Press the shutter release button fully on the remote control unit.

<The picture is taken immediately.

>The self-timer lamp blinks quickly and the picture is taken after approximately three seconds.

Focusing may be compromised if you move the camera while the self-timer lamp is blinking.

•The buttons on the camera can be used in the normal way.

•Ensure that the remote control unit is no more than 4 m (13 ft.) away from the front of the camera.

72