Use the four-way controller (23) to select [Transfer Mode].

18

Saving Images by Connecting Your Camera and Macintosh (For Macintosh)

Setting the USB Connection Mode to [PC]

Jis used as an example here. When using w, [Transfer Mode] does not need to be set. Go to “Connecting the Camera and Macintosh” (p.19).

1 Press the 3button on the camera.

The [ARec. Mode] menu or the [QPlayback] menu appears.

2 Press the four-way controller (5) to display the [HSet-up] menu.

3

4 Press the four-way controller (5).

A pull-down menu appears.

5

6

Use the four-way controller

 

 

 

 

 

 

 

 

 

 

 

Set-up

 

 

 

 

 

 

 

 

 

 

 

(23) to select [PC].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brightness Level

0

 

 

 

 

 

 

 

 

Video Out

NTSC

 

 

 

 

Transfer Mode

P

C

 

 

 

 

Auto Power Off

PictBridge

 

 

 

 

File #

PC-F

 

 

 

 

Sensor Cleaning

 

 

 

 

 

 

 

 

Cancel

 

OK OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the 4button on the camera.

•Do not connect the camera to your computer while [PictBridge] is selected for the [Transfer Mode].

•If the USB transmission speed of the computer is slower than that of the camera, an error may occur when transferring data. If this occurs, set the Transfer Mode to [PC-F]. This sets the transfer speed to the USB 1.1 data transfer rate, thereby reducing the possibility of an error.