140
The shutter speed and aperture value
are displayed in the viewfinder and on the LCD panel. Of the shutter speed and aperture, the value being adjusted
is underlined in the viewfinder. While adjusting the shutter speed or aperture value, the difference with the
appropriate exposure (EV value) appears at the bottom right of the viewfinder. The appropriate exposure is set when [0.0] is displayed.
• When in a (Manual) mode, the sensitivity is equivalent to ISO 200 when sensitivity is set to [AUTO].
•Blinks when the difference with appropriate exposure is over ±3.0.
•Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [ACustom Setting] menu. (p.143)
•Set the aperture to the s position while
holding down the
5using a lens with an aperture ring.
Reference Function
Exposure Warning
You are out of the measuring area if the shutter speed and aperture blink.
Use an ND (Neutral Density) filter if the subject is too bright.
Use a flash if it is too dark.