Using
You can use
•
•
Using b(Shutter Priority) Mode
1Set the mode dial to b.
b (Shutter Priority) mode is set.
2Use the
The background is not properly corrected if aperture value is flashing when shutter speed is set. Set the shutter speed so that aperture does not flash.
3Press the Kbutton. The flash pops up.
4Take the picture.
Using a(Manual) Mode
1Set the mode dial to a. a(Manual) mode is set.
2Set the shutter speed (under 1/180 sec.) and aperture value to obtain correct exposure.
3Press the Kbutton. The flash pops up.
In a(Manual) mode, pop up the flash at any time.
4Take the picture.
149
5 FunctionReference