Problem | Cause | Remedy | |
| The focus mode is | Set the focus mode lever to =. (p.118) | |
| set to \ |
| |
| The focus mode is | Set the focus mode to l(Single | |
The Autofocus | set to k | ||
mode). (p.121) | |||
does not work | (Continuous mode) | ||
|
|
| |
| The capture mode | Set the capture mode to setting other than | |
| is set to \(Moving | ||
| \(Moving Object) mode. (p.47) | ||
| Object) mode |
| |
AE lock | AE lock is not |
| |
available when set | Use AE lock with any setting other than a | ||
function does | |||
to a(Manual) mode | (Manual) mode or p(Bulb) mode. | ||
not operate | or p(Bulb) mode |
| |
|
| ||
|
|
| |
| When flash mode is |
| |
| set to [Auto |
| |
| discharge] or [Auto | Set flash mode to [Manual discharge] or | |
flash+Redeye | |||
[Manl flash+Redeye reduct]. (p.49) | |||
does not | reduct], the flash will | ||
discharge | not discharge if the |
| |
| subject is bright |
| |
| Mode dial is set to | Set mode dial to any setting other than a | |
| a (Flash OFF) | (Flash OFF). (p.47) | |
The power | The camera does |
| |
zoom system |
| ||
not have the power | Use manual zoom. (p.48) | ||
does not | |||
zoom function |
| ||
function |
| ||
|
| ||
|
|
| |
USB | The transfer mode | Set transfer mode to [PC]. | |
connection with | is set to [PictBridge] | ||
computer does | An error occurred |
| |
not work | while sending USB | Change the transfer mode to | |
properly* | data |
| |
|
|
| |
USB | The transfer mode |
| |
connection with |
| ||
printer does not | is set to [PC] or | Set transfer mode to [PictBridge]. (p.84) | |
work properly |
| ||
|
| ||
|
|
|
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
191
6 Appendix
*Refer to p.13 of the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details on connecting the camera to a PC.