Transferring your Images to the Computer

Before image transfer, please read the following guideline carefully.

System Requirements

￿Pentium 166 MHz processor or higher ￿Windows 98/2000/Me

￿Available USB port ￿At least 32 MB RAM

￿80 MB available hard disk space ￿CD-ROM drive ￿Appropriate color monitor ￿VGA card

Software Installation

For Users of Windows 98 and 2000/ME

If you are planning to transfer your images into your PC and edit images, make sure to complete the driver and software installation before connecting the camera. Follow the steps on this page.

1.Insert the software CD-ROM disc S-SW4 into CD-ROM drive.

2.Right click on START, and then left click on

EXPLORER.

3.Left click on the S-SW4 (R) icon.

4.The files of PhotoSuite IIISE, PhotoVista and USB driver appear.

5.Left click twice for your desired file for installation. The file will be opened.

6.Left click twice on Setup exe for instillation. Follow the on screen instructions to com- plete the software installation.

Acquiring Images

For Users of Windows(98/ME/2000)

Follow the steps below transfer your images to the computer.

1.Left click twice the my computer icon on your desktop to open the my computer.

2.Connect one end of the USB cable (I-USB4) to your PC.

3.Turn the camera ON and set the mode dial to PC.

4.Connect the other end of cable to the camera.

5.A Removal Disk appears.

6.Drag and drop the images in the above men- tioned drive to the other directories desired.

Editing and Processing Images

Using the software S-SW4 for MGI PhotoSuite and MGI PhotoVista, follow the instruction of HELP on screen.

21