3.Select the WHITE BALANCE item by the arrow buttons (￿/￿) and then press the OK button to confirm.

4.Use the arrow buttons (￿/￿) to select the desired white balance setting.

5.Press the OK button again to make the change. The cursor returns to the CAPTURE MENU.

￿This setting is reset to AUTO when the camera power is off.

How to set the OSD (On-Screen Display) language?

To set the OSD language, perform the following:

1.Set the Operating Mode Dial to SETUP.

2.The Setup menu appears.

3.Select the LANGUAGE item by the arrow buttons (￿/￿) and then press the OK button to confirm.

4.Use the arrow buttons (￿/￿) to select the language.

5.Press the OK button again to make the change. The cursor returns to the SETUP MENU.

How to set the Self-Timer?

To use the Self-Timer function, perform the following:

1.Set the Operating Mode Dial to CAPTURE .

2. Press the Self-Timer button to set the Self-Timer on. appears on the status LCD.

3.Press the Shutter button.

4.After 10 seconds, an image is captured and the timer will turn itself off.

￿The Self-Timer is located in front of the camera, and it is designed to count down for 10 seconds. In the first 7 seconds, the indicator lights up and then blinks rapidly for the last 3 seconds.

How to format the Internal Memory or CF (CompactFlash) card?

Perform the following procedures:

1.Set the Operating Mode Dial to SETUP.

2.Select the FORMAT CARD item by the arrow buttons (￿/￿) and then press the OK button to confirm.

3.Use the arrow buttons (￿/￿) to select

FORMAT.

4.Press the OK button again to re-format the internal memory or CF card. The cursor returns to the SETUP MENU.

14