163

Using in Wireless Mode

1Place the external flash (AF540FGZ or AF360FGZ) at the desired location.

2Set the power switch of the above external flash to [WIRELESS].

3Set the wireless mode of the above external flash to [S] (Slave).

4Turn on the camera, and then turn the mode dial and set the exposure mode to e, b, cor a.

5Set the power switch of the external flash on the camera to [WIRELESS].

6Set the wireless mode of the external flash on the camera to a(Master) or A(Control).

• Wireless mode is not available for the built-in flash.

• Set the wireless slave mode of the external flash to [SLAVE1].

Wireless Flash Control (P-TTL Flash Mode)

The following information is exchanged between the two external flash units (AF540FGZ or AF360FGZ) before the flash is discharged when the external flash units are used for wireless flash.

Press the shutter release button fully.

1The flash unit on the camera emits a small control flash (relays the flash mode of the camera).

2The external wireless flash unit emits a small control flash (relays confirmation of subject).

3The flash unit on the camera emits a small control flash (relays flash output of external wireless flash unit).

*The flash unit on the camera will emit a small control flash one more time after this to relay the flash duration time when HS b (High- speed sync) is set.

4The external flash unit(s) discharges as main flash.

5 FunctionReference

Set the wireless slave mode of the external flash to [SLAVE1].