Setting the Shake Reduction Function

The [Shake Reduction] menu appears when the camera is turned on with the Shake Reduction switch on and a type of lens that does not support automatic acquisition of lens information such as focal length (p.47) is mounted.

Use the [Shake Reduction] menu to set the [Focal Length].

• [Focal Length] cannot be set manually on the [Shake Reduction] menu when using a lens that supports automatic acquisition of lens information such as focal length because [Focal Length] is set automatically.

Set [FI with S lens used] on the [ACustom Setting] menu to [Available] to enable the focus indicator when using a screw mount lens. If this is set to [Unavailable], the camera assumes there is no lens attached, and the Shake Reduction function cannot be used.

When using a lens without the sposition on the aperture or with the aperture set to a position other than the sposition, set [Using aperture ring] on the [A Custom Setting] menu to [Permitted].

49

3 BasicOperations

1 Use the four-way controller (op) to set [Focal Length].

Select from the following 34 focal length values. (The default setting is 35.)

8

10

12

15

18

20

24

28

30

35

40

43

50

55

65

70

77

85

100

120

135

150

180

200

250

300

350

400

450

500

550

600

700

800

 

 

 

 

 

 

Shake Reduction

Focal Length

100 120 135

Cancel

OK OK

• If the focal length for your lens is not listed above, select the value closest to the actual focal length.

When using a zoom lens, select the actual focal length at the zoom setting in the same manner.

Effect of Shake Reduction is influenced by the shooting distance as well as focal length information. The Shake Reduction function may not perform as expected when shooting at close ranges.

2 Press the 4button.

The camera is ready to take a picture.

To change the [Focal Length] setting, use [Shake Reduction] on the [ARec. Mode] menu. (p.104)