5 Pan the camera to the right and
take the second frame.

1 2

4 Taking

Be sure to make the “overlay” cover the

 

same position in the second frame when

 

you compose.

 

Pan the camera to the right and press the

SHUTTER 2nd frame OK Exit

shutter release button fully to take the

 

second frame. After the Instant Review of the second frame, the camera is ready for taking the third frame.

Repeat Steps 4 and 5 to take the third frame. After the third frame is taken, the message “Data being processed” will blink. After the Instant Review of the full panoramic picture, the camera will return to the screen to take the first frame again.

To stitch only the first frame and the second frame into a panoramic picture, go to Step 6 and select “Save” in Step 7.

To quit taking panoramic pictures
Pictures

6

7

Press the 4 button.

A confirmation screen for saving the taken image(s) appears.

Use the four-way controller (23) to select “Save”, “Discard”, or “Cancel” and press the 4 button.

Save the image(s) and exit this screen?

Save

Discard

Cancel

MENU

OK OK

“Save”

: When you select “Save” after the first frame is taken, the

 

frame taken is saved, and the camera will return to the

 

screen to take the first frame.

 

When you select “Save” after the second frame is taken,

 

the message “Data being processed” blinks, and after the

 

Instant Review of the 2 frames stitched together, the

 

camera will return to the screen to take the first frame.

“Discard” : All the frames taken will be discarded, and the camera will return to the screen to take the first frame.

“Cancel” : The camera quits the operation and returns to the most recent shooting screen.

In mode, the flash does not discharge.

60