•The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault.

•Periodic checks are recommended every 1 to 2 years in order to maintain high performance.

•If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided.

•Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may cause damage to the camera. If rain or drops of water get onto the camera, please wipe dry.

•Refer to “Precautions When Using an SD Memory Card” (p.19) regarding the SD Memory Card.

•Please note that formatting an SD memory card or built-in memory will delete all data, however it may still be possible to recover that data using off-the-shelf data recovery software. Please manage your camera’s memory at your own risk.

•Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.

•Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the LCD monitor.

•When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.

•The AC plug cord supplied with the camera is for exclusive use with the battery charger D-BC8. Do not use it with any other equipment.

Recycling Batteries

This symbol indicates that the battery is recyclable. Cover the terminals with insulating tape and take the battery to a store displaying this symbol.

LED Safety Standard

This device is a digital still camera that conforms to the safety standard

 

(IEC60825-1) for a Class 1 LED product.

11