Pentax Optio T20 Troubleshooting

Troubleshooting

Troubleshooting

7

Appendix

Problem	Cause	Solution
	Battery is not installed	Check if a battery is installed. If not,
		install battery (p.15).
	Battery is installed	Check orientation of battery. Reinsert
Camera will not	incorrectly	battery (p.15).
	The battery is exhausted	Charge the battery (p.14).
turn on
	The battery performance	Warm up the battery by placing it in a
	has temporarily	pocket where it can come in contact
	deteriorated because it is
	too cold	with body heat.
	Camera is turned off	Turn the camera on (p.20).
	Camera is connected to a	The LCD monitor turns off when the
	computer	camera is connected to a computer.
	Camera is connected to a	The LCD monitor turns off when the
	TV	camera is connected to a TV.
No image on LCD	Display mode is set to Off	Touch the LCD monitor to change the
		display mode setting (p.40).
monitor
		Deactivate by pressing the shutter
	Power Saving function	release button halfway in Capture
	has activated	mode or by touching the LCD monitor
		in Playback mode.
	Image is displayed but is	Increase the brightness of the LCD
	hard to see	monitor (p.134).
		Pictures cannot be taken while the
	Flash is charging	flash is charging. Wait until charging is
		finished.
Shutter will not		Insert SD Memory Card with available
	No available space on SD	space or delete unwanted files (p.17,
release
	Memory Card or in the	p.89). Change the picture size or
	built-in memory	quality or both and try again (p.49,
		p.94).
	Recording	Wait until recording is finished.

146