Pentax Optios7 Setting the Sensitivity

4 TakingPictures

Shutter release

button		Rec. Mode
	MENU	Recorded Pixels	7M
		Quality Level
		White Balance	AWB
Four-way		AF Setting
		AE Metering
controller
		Sensitivity	Auto

MENU Exit

MENU button

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.

Sensitivity

Auto	Flash does not discharge: Automatically set in a range from 50 to 200.
	Flash discharges: Automatically set in a range from 50 to 400.

50• The lower the sensitivity (the lower values), the sharper the image and

100the less noise. The shutter speed will be slower in low light conditions.

•The higher the sensitivity (the higher values), the faster the shutter

	200	speed in low light conditions to reduce camera shake, but the image
	400	may be affected by noise.
1	Press the MENU button in Capture mode.
2	The [A Rec.Mode] menu appears.
	Use the four-way controller (23)		Rec. Mode
	to select [Sensitivity].
3			Recorded Pixels	7M
	Press the four-way controller (5).		White Balance	AWB
			Quality Level
	The pull-down menu appears.		AF Setting
			AE Metering
			Sensitivity	Auto

4

5

Use the four-way controller (23) to change the sensitivity.

Press the shutter release button halfway.

The camera is ready to take the picture.

MENU Exit

Rec. Mode

Recorded Pixels	7M
Quality Level	Auto
White Balance	AWB50
AF Setting	100
AE Metering	200
Sensitivity	Auto400
MENU Cancel	OK OK

Saving the Sensitivity 1p.102

You can select 800 or 1600 for Sensitivity in Blur reduction mode. When auto is set, the Sensitivity is set automatically in a range from

9050 to 1600.