9 Appendix

Message

Description

 

This message appears when you try to switch to Q mode

Data being recorded

while an image is still being recorded, or when the protect

setting or DPOF setting is being changed. It disappears

 

 

after the image is recorded or the setting is changed.

 

This message appears when the camera takes more than

Data being processed

five seconds to display an image due to image processing,

or when the SD Memory Card or built-in memory is being

 

 

formatted.

Built-in memory full

Displayed if the built-in memory is full when saving a file.

No image to be

Displayed when there are no images or sound files.

processed

 

This image/sound

Displayed for files that cannot be processed.

cannot be processed

 

No card in the camera

Displayed when no SD card is inserted.

The built-in memory is not

Displayed when there is insufficient built-in memory to

enough to copy

perform copying.

images/sounds

 

Cannot process

Displayed when Red-eye Compensation processing fails.

correctly

 

Display image/sound

Displayed when the camera enters built-in memory display.

from built-in memory

 

Green mode must be

Displayed when you try to use a function not supported by

canceled to use this

the Green Mode.

function.

 

Messages such as the following may appear on the display when using the PictBridge function.

Message

Description

Low paper level in the

The paper level of the printer is low.

printer

 

No paper in the printer

There is no paper in the printer.

Paper stuck in the printer

The paper is stuck in the printer.

Low ink level in the printer

The ink level of the printer is low.

No ink in the printer

There is no ink in the printer.

Printer error

An error message has been sent from the printer.

Data error

A data error message has been sent from the printer.

Connection error

Displayed when a PictBridge connection fails.

Check printer

 

Printing now

Displayed when printing is being executed.

190