Charging indicator

3

While charging: Lights green

 

Charging finished: Turns off

 

To power outlet

2

Battery charger

AC plug cord

1

 

Charging the Battery

Use the battery charger to charge the battery before installing it in the camera for the first time or after a long period of non-use, or when the message [Battery depleted] appears.

Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)”

1 Connect the AC plug cord to the battery charger D-BC68. 2 Plug the AC plug cord into the power outlet.

3 Place the battery in the charger so that the PENTAX logo is visible.

The charging indictor lights green while the battery is charging and turns off when charging is finished.

4 Remove the battery from the battery charger when charging is finished.

• The time required to fully charge the battery is about 115 minutes (max.). The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F). (The charging time may vary depending on the ambient temperature and charging conditions.)

•Charging the battery a day before use or on the day of use is recommended.

•The battery has reached the end of its service life if it runs down soon after being charged. Replace with a new battery.

1 GettingStarted

17