Add form
Which form do you
want to use?
Set the area to cut

Editing Images and Movies

4 Drag the stylus pen over the area you want to cut.

• Draw an unbroken line to select the area you want to cut. When you have enclosed the area with the line and release the stylus pen from the screen, the area to cut is determined.

•Images can be cut while they are enlarged

by the zoom lever. Note, however, that images cannot be enlarged/ reduced once the area to cut is already determined.

•You can add any number of areas to cut before advancing to step 5.

•To change the area to cut, touch [Cancel] and select the area again.

5 Touch [OK].

The confirmation dialog appears.

46 Touch [Save].

Images Editing and Back Playing

118

The stamp (My Stamp) is registered, and the screen returns to the My Stamp Selection screen.

To Cut Stamps by Shape Cutting3 Touch [Shape Cutting].

The Shape Cutting Selection screen appears.

4 Select the shape to cut and touch it. My

The Image Shape Cutting screen appears.

•The position to cut can be adjusted by dragging the shape.

•The size of the shape to cut can be

changed in three stages by the enlarge/

reduce button at the top right of the screen. CancelOK (large/medium/small) The default is “medium”.

•When [Add form] is touched, the cutting frame so far is determined, and the same shape can be used again. Note, however, that same-shape frames cannot be added to enlarged screens.