Pentax V10 fully, Manual Setting, Press the 4 button, Press the 3 button, 6 Press the 3 button, (23) to select K(Manual), material for White balance

6 Press the 3 button.

The camera returns to capture status with the current setting.

Refer to “Manual Setting” (p.88) for instructions on adjusting the white balance manually.

If you use the [White Balance] function frequently, you can save time by assigning it to the Green button. (p.55)

Saving the White Balance 1p.97

Manual Setting

Have a blank sheet of white paper or similar material for White balance adjustment ready beforehand.

4	1	In the White balance screen, use the four-way controller
Taking	2	Point the camera at the blank	White Balance
		(23) to select K(Manual).
Pictures		sheet of white paper or similar
		material for White balance
		adjustment so that it fits the frame
	3	at the center of the LCD monitor.		SHUTTER Adjust
		Press the shutter release button
			MENU Cancel		OK OK

fully.

4

5

The white balance is automatically adjusted.

Press the 4 button.

The setting is saved and the screen returns to the [A Rec. Mode] menu.

Press the 3 button.

The camera returns to capture status.

Note the camera stores the last manually set white balance until it is set again or the camera is reset to its default settings using the [Reset] option on the [BSetting] menu.

88