9 Use the four-way controller (2345) to choose the paper size.

You can only choose a size that is supported by your printer.

10 Press the 4 button.

The Paper Size setting is saved, and the screen returns to the print settings screen.

Paper Size

 

2L

Setting

Card

8”×10”

L

A4

100×150

Letter

Postcard

11”×17”

4”×6”

A3

 

 

MENU Cancel

OK OK

11 Use the four-way controller (23) to select [Paper Type] and press the four-way controller (5).

A pull-down menu appears.

12 Use the four-way controller (23) to select the paper type and press the 4 button.

The Paper Type setting is saved, and the screen returns to the print settings screen. Set [Quality] and [Border Status] in the same way as in Steps 11 and 12.

If you select [_ Setting] for each print setting, images are printed according to the settings made on the printer.

Paper Type with more Esupports higher quality paper. Quality with more E indicates higher print quality.

A confirmation dialog appears after each item has been set.

13 Press the 3 button.

The screen returns to the confirmation dialog.

14 Press the 4 button.

The image is printed according to the settings.

Press the 3 button to cancel printing.

• The power indicator lights while the camera is communicating with the printer, and blinks while the card is being accessed and during printing. Do not disconnect the USB cable while the power indicator is blinking.

The [Paper Size], [Paper Type], [Quality] and [Border Status] settings are reset to the defaults when the camera is turned off.

Disconnecting the Cable from the Printer 1p.157

6 Editingand

Images Printing

155