Pentax ZS-Mount) Fitting Instructions, Attaching the lens, Removing the lens, It counterclockwise

Fitting Instructions

Attaching the lens

First, hold the lens at the grooves of the depth-of-field ring. GB Align the index mark in the middle of the depth-of-field scale

with the marking on the camera body and insert the lens in the camera‘s bayonet mount. Turn the lens clockwise until you hear and feel it click into place. For Nikon models, turn the lens counterclockwise until it clicks into place. ZS lenses should be screwed clockwise onto the lens mount of the camera body until secure. The index mark on the scale should then be at the top.

Removing the lens

To remove the lens, hold it at the grooves of the depth-of-field ring. Hold down the lens release knob on the camera while tur- ning the lens counterclockwise (or clockwise in the case of ZF lenses) and remove the lens from the camera‘s bayonet mount. To remove the ZS lens, hold it by the grooves of the depth-of- field ring. Unscrew the lens from the body by turning

it counterclockwise.

Attaching and removing filters, lens shade

Standard threaded filters can be attached to the front of the

lens. If you use more than one filter at a time mechanical GB vignetting may occur.

To attach the shade in operation mode, align the white dot on the shade with the shade index on the lens. Turn the shade

clockwise­ until it clicks into its locked position. To remove the lens shade, push the lens shade towards the lens and turn it counterclockwise. The shade can also be attached in reverse mode for transportation and storage.

18 19