Safety Information

Warnings

Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To remove power from system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before you open the chassis, add, or remove any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board.

viii

Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User’s Guide

Page 7 Page 9
Page 8
Image 8
Intel SR1475NH1-E, SE7230NH1-E manual Safety Information
Page 7 Page 9

SR1475NH1-E, SE7230NH1-E specifications

The Intel SE7230NH1-E and SR1475NH1-E motherboards are pivotal components designed specifically for server and workstation environments, delivering exceptional performance, reliability, and scalability. These motherboards cater to the demands of enterprise-level applications, making them ideal for various computing needs, from database management to virtualization.

The Intel SE7230NH1-E is built on the Intel 5000P chipset, optimized to support dual Intel Xeon processors. This motherboard is engineered for businesses requiring substantial computational power, featuring up to 64GB of DDR2 memory support across eight DIMM slots. The integration of ECC (Error-Correcting Code) memory ensures enhanced data integrity and reliability, crucial for mission-critical applications.

On the other hand, the SR1475NH1-E motherboard offers a slightly different configuration while maintaining high performance. It supports the Intel Xeon 5100 and 5300 series processors, also featuring dual-socket capabilities for extensive workload management. With its advanced memory architecture, it provides support for DDR2 memory, boosting performance while ensuring fault tolerance through ECC support.

Both motherboards exhibit robust I/O capabilities, with multiple PCI Express slots and standard PCI slots, allowing extensive expansion options for network cards, RAID controllers, and other critical peripherals. Integrated SATA interfaces enable efficient storage solutions, facilitating hot-swappable drive capability, essential for maintaining uptime in server environments.

In terms of connectivity, the Intel SE7230NH1-E and SR1475NH1-E motherboards come equipped with Dual Gigabit Ethernet ports, providing seamless network connectivity and redundancy. This feature is vital for organizations that require constant network access and reliable data transfer rates.

The thermal management solutions embedded within these motherboards are also noteworthy, featuring active and passive cooling designs that ensure stable operation under high workloads. This is particularly crucial in server environments where prolonged performance can lead to overheating, potentially affecting hardware longevity.

Moreover, these motherboards support technologies such as Intel Virtualization Technology, enhancing the ability to run multiple operating systems on a single platform, thus optimizing resource usage.

In summary, the Intel SE7230NH1-E and SR1475NH1-E motherboards stand out due to their combination of compatibility, expandability, and resilience. They are engineered to meet the extensive requirements of modern enterprise computing, making them valuable assets for businesses seeking reliable server solutions.
Top Page Image Contents