ZxA5 Amplifier (cont’)
Crossover Mode Switch
Selects between 40 Hz highpass filter for Fullrange use, and 100 Hz highpass filter for use with a subwoofer. It is not recommended that you use a ZxA5 in Fullrange mode with subwoofers.
Level
This control sets the output level of the ZxA5 in a range between
Power Switch
AC switch for switching the ZxA5’s power ON or OFF. The switch lights after turning the power ON. If the switch is not lit upon turning the power on, make sure that the AC cord is correctly connected. If the AC cord is correctly connected and the AC switch does not light upon
Mains In
AC connection is established via a PowerCon connector. A 15’ (5m) long AC cord with PowerCon plug is supplied.
Mains Out
The PowerCon AC out socket allows the connection of additional ZxA5 Systems.
To prevent AC network overload, connecting more than (3) ZxA5 Systems to a single AC outlet (10A - 16A) is not recommended.
CAUTION: Blue and grey PowerCon power connector shall not be engaged or disengaged when under load or live.
CAUTION: This appliance has no
6 |