7.The first time the ISBM72 is accessed, it may take up to three minutes to fully initialize with the radio. Once the interface is recognized, and the radio enters CD changer mode, the iPod will be controllable using the radio’s track forward, and track back buttons.

Note: it may be necessary to press the Play button on the iPod to begin playback.

8.After confirming the functionality of the ISBM72, finish the installation by securing the components and wiring in a location away from sharp metal edges, or moving parts that could damage the ISBM72.

9.Return all interior panels to their original configuration.

6. iPod Operation

To select the iPod from the radio, press the button that would normally activate the factory CD changer. Some radio models require pressing the “Seek >” button once, after pressing the CD button. Yet, it may also be necessary to press Play on the iPod itself to begin playback. In some cases, if it is the first time selecting the iPod from the radio it may take up to three minutes for the iSimple BMW interface to initialize.

CONTROLLING THE IPOD FROM THE RADIO

With the iSimple BMW interface, the radio will control the iPod as if it were a factory CD changer. Therefore, operation will be done by using the same buttons you would use to control a factory CD changer. For more details on your particular radio, consult your vehicle’s owner’s manual.

The iSimple BMW interface allows you to skip songs forward and backwards and also to fast forward and rewind through a particular song. In general, most radios will utilize “seek” or “track” buttons to control these functions.

CONTROLING THE IPOD FROM THE IPOD

The iSimple BMW interface allows you to keep full control of the iPod from the click wheel. You can browse files and change Playlists on the iPod. You can also skip songs forward and backwards from the iPod. The iSimple BMW interface does not disable any functionality of the iPod!

RADIO DISPLAY DURING IPOD OPERTION

Some factory radio’s may show DISC and TRACK numbers on the display of the radio. The iSimple BMW interface does not send any information from the iPod to the radio. This means that the DISC and TRACK numbers shown on the display will not and can not reflect the song number on the iPod due to the complex nature of the music library. Some factory radio’s may flash zeros on the display of the radio, or toggle back and forth between 1:00 and 2:00. All these are normal behav- iors and do not represent a malfunction.

CONTROLING THE IPOD FROM THE STEERING WHEEL CONTROLS

If your vehicle’s steering wheel controls have the ability to select track and control the forward and rewind functions of your factory CD changer, then they will also control these same functions on the iPod.

Page 5
Image 5
Peripheral Electronics ISBM72 owner manual IPod Operation, Controlling the Ipod from the Radio