Perle Systems S-100MM-XXXXX Powering up the Media Converter

Fast Fiber to Fiber Media Converter – Installation Guide 7
Installing the Duplex Fiber Cable
Locate a 100Base-X compliant duplex (2 strands) fiber cable with
appropriate connectors.
Connect the fiber cables from one media converter to the other
media converter/switch/fiber device ensuring that the RX and TX
are reversed at the opposite end.
Installing the Simplex Fiber Cable
Locate a 100Base-X compliant simplex (1 strand) fiber cable with
appropriate connectors.
Connect the fiber cable from one Media Converter Module to
another Media Converter/switch/fiber device.
Powering up the Media Converter
1. Connect the Perle supplied power adapter to the media
converter.
2. Turn on the power at source.
3. Check that the PWR LED light is lit and on solid.