Step Determine Kennel Size
1By using all 4 panels, you can expand your Cottageview Dog Kennel™ to one of two traditional sizes:
7 ½ ft. (W) x 7 ½ ft. (L) | 5 ft. (W) x 10 ft. (L) |
Purchase additional Expansion Panels to further customize the size and shape of your kennel.
__________________________________________________________________________________________________
Step
2
Install Expansion Panels
1.Using a wrench, remove the two kennel clamps that are attached to the wire mesh of each of the kennel panels ( 2A).
2.Remove the SunBlock Top™ from the kennel by using wire cutters to cut the cable ties. Note: for 5 ft. x 10 ft. set up you can remove the cable ties from only one side of the SunBlock Top. This will allow your dog to receive partial sun protection.
3.Using a wrench, loosen the kennel clamps so the kennel panels can be disassembled to make room for the expansion panels.
4.Using a wrench and two of the supplied kennel clamps, attach expansion panel to the kennel. Position one clamp approximately 4 inches from the top of the kennel and one clamp approximately 6 inches from the bottom of the kennel. For the safety of your dog, attach clamp so that nut is on the outside of the kennel. See (2B) for clamp and panel orientation.
5.Continue connecting remaining expansion panels using wrench and two clamps per connection.
2A
2B
4 |
