Petsafe In-Ground Fence Kit Function and Response Table, Fit the Receiver Collar

Function and Response Table

Indicator Light		Mode	Receiver Collar Function	Temperament of Pet
Response
1	Flash	1	Tone and Vibration	Timid
2	Flashes	2	Tone, Vibration and Static	Timid or Average
			Correction (Low)
3	Flashes	3	Tone and Static Correction	Average
			(Medium)
4	Flashes	4	Tone and Static Correction	Average or High Energy
			(High)
5	Flashes	5	Tone only	Timid
Flashes once every		Low
4-5 seconds		Battery

Note: Begin training with Mode 3 and only increase if your pet does not respond to the Static Correction.

____________________________________________________

Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is important for effective training. The Contact Points must have direct contact with your pet’s skin on the underside of his neck.

To ensure a proper fit, please follow these steps:

1.Make sure that the battery is not installed in the Receiver Collar.

2.Start with your pet standing comfortably (2A).

3.Centre the Contact Points underneath your pet’s neck, touching the skin. If your pet has a long or thick coat, use the enclosed long Contact Points to reach through the hair. Note: It is sometimes necessary to trim the hair around the Contact Points to make sure that contact is consistent.

4. Check the tightness of the Receiver Collar by	2B
inserting one finger between the end of a Contact
Point and your pet’s neck. The fit should be snug but
not constricting (2B).
5. Allow your pet to wear the collar for several minutes,
then re-check the fit. Check the fit again as your pet
becomes more comfortable with the Receiver Collar.

2A

www.petsafe.net 5