Adjustment
13.07.02 Lateral alignment of the thread catcher
Requirement
1.The tip of the thread catcher 5 must point exactly to the center of the needle.
2.The thread catcher 5 must be horizontal. It must not graze anything when it is operating.
5 | 2 | 1 |
6
6
3
5
Fig. 13 - 29
● Remove knife 1 (screw 2). ● Move needle bar to its BDC.
●Loosen stop 3 (screws 4).
●Position thread catcher 5 (screw 6) manually in front of the needle.
●Align thread catcher 5 (screws 7) according to the requirements.
For further adjustments, leave knife 1 removed and stop 3 loosened.
13 - 31