Adjustment
13.07.03 Knife position
Requirement
1.There must be a distance of 4 mm between the cutting edge of the knife and the needle.
2.The right edge of the knife 1 must not extend beyond the right edge of the thread catcher (see arrow).
3
4 mm
1
2 1
Fig. 13 - 30
● Bring the needle bar to BDC.
● Slide knife 1 under the locking tab and align according to requirement 1.
●Tighten screw 2 lightly.
●Adjust thread catcher carrier 3 by hand until the wedge point in the thread catcher is positioned just in front of the cutting edge of the knife.
●Align knife 1 according to requirement 2 and tighten screw 2.
13 - 32