Adjustment
13.07.05 Manual trimming check
Requirement
Two threads must be cut perfectly both left and right in the cutout of thread catcher 1.
1
3
2 5
4
1
Fig. 13 - 32
● Move thread catcher 1 by hand to its front point of reversal. ● Double the thread and insert into catcher cutout.
●Carry out trimming operation manually.
●If the threads are not cut according to the requirement, align thread catcher 1 (screws 2) with knife 3 accordingly.
●Move stop 4 against thread catcher 1 and tighten screws 5.
●Check chapter 13.07.02 Lateral alignment of the thread catcher, and readjust if necessary.
13 - 34