Setting up
9.03 Removing/Threading the bobbin case
1
2
Fig. 9
Switch the machine off! Danger due to unintentional starting of the machine!
Removing the bobbin case:
●Open the bed slide.
●Raise latch 1 and remove bobbin case 2.
Inserting the bobbin case.
●Insert bobbin case 2 so that it clicks into place.
●Close latch 1 and close the bed slide.
Do not operate the machine when the hook compartment cover is open!
Danger of injury from moving parts!
9.04 Threading the bobbin thread and regulating the bobbin thread tension
Switch the machine off! Danger due to unintentional starting of the machine!
● Thread the bobbin as shown in Fig.
must rotate as shown by the arrow. ● Regulate the bobbin thread tension on
srew 1.
Fig. 9 - 04
27